Rohde and Schwarz ENV216 Two-Line V-Network for disturbance voltage measurements on single-phase EUTS
Description of the Rohde and Schwarz ENV216 Two-Line V-Network
The R&S ENV216 two-line V-network meets the requirements of CISPR 16-1-2 and EN 55016-1-2 for V-networks with a simulated impedance of (50 μH + 5 Ω) || 50 Ω in the frequency range 9 kHz to 30 MHz as well as the ANSI C63.4 in the frequency range from 150 kHz to 30 MHz.
A female connector with protective earth contacts is provided for connecting the EUT. Various models with country-specific connector systems are available.
Owing to its compact design and low weight, the R&S ENV216 is ideal for frequently varying applications and especially for on-site disturbance voltage measurements on single-phase EUTs. Note that high leakage currents are produced because of the standard design of these V-networks. The networks should therefore be connected to a low-impedance protective earth system. In uncertain cases, an isolating transformer should be used
Features of the Rohde and Schwarz ENV216 Two-Line V-Network
- Frequency range 9 kHz to 30 MHz
- Power-handling capacity up to 16 A, constant current (country-specific)
- Simulated impedance (50 μH + 5 Ω) || 50 Ω in line with CISPR 16-1-2 Amd. 2:2006
- V-network in line with CISPR, EN, VDE, ANSI, FCC Part 15 and MIL-STD-461D, E and F
- Calibrated in line with CISPR 16-1-2
Air-core design and artificial hand
The R&S ENV216 two-line V-network is based on air-core inductances and contains an artificial hand.
Switch-selectable high pass filter of 150 kHz
To prevent the measuring receiver from being overdriven by low-frequency spectra of high level, a 150 kHz highpass filter can be cut in.
Built-in 10 dB attenuator pad
To ensure standard impedance irrespective of the receiver input attenuation, the R&S ENV216 is equipped with a 10 dB attenuator pad.
Built-in pulse limiter (can be switched off)
A built-in pulse limiter which can be switched off protects the receiver input.
Remote control with TTL levels (compatible with Rohde & Schwarz measuring receivers)
TTL control inputs that can be driven by controllers and Rohde & Schwarz measuring receivers are provided for remote control in automatic test systems (phase selection and activation of highpass filter). Optocouplers prevent pick-up of external disturbance.
Our service:
1.One-stop service from manufacture to shipping.
2.Your inquiry related to our products or prices will be replied in 24hours.
3.Well-trained and experienced staffs to answer all your enquires influent English.
4.Distributor ship is offered for your unique desigh and some our current models.
5.Protection of your sales area, ideas of design and all your private information.
FAQ:
1.Can you ship order to Canada or Australia ?
Yes,we can .We send orders worldwide .
2. What delivery method do you use ? and delivery time ?
We can ship by EMS,DHL,FedEx,UPS,TNT with tracking number. Usual delivery time is 4-7 workdays.
3. What is your payment term?
100% T/T payment before shipment.
4. How can I ask any other question ?
You can contact us online or leave us messages below.
Product Tags:
|
|
Pre-Owned Rohde Schwarz ENV216 Two-Line V-Network 9 kHz to 30 MHz Images
|
